Snow Traction Devices - Jeep Gladiator 2024 Owner's Manual

Table of Contents

Advertisement

284
SERVICING AND MAINTENANCE
NOTE:
If you intend parking or storing your vehicle for an
extended period after cleaning the wheels with wheel
cleaner, drive your vehicle and apply the brakes to
remove the water droplets from the brake components.
This activity will remove the red rust on the brake rotors
and prevent vehicle vibration when braking.
Dark Vapor Chrome, Black Satin Chrome, or Low Gloss
Clear Coat Wheels
CAUTION!
If your vehicle is equipped with these specialty
wheels, DO NOT USE wheel cleaners, abrasives, or
polishing compounds. They will permanently damage
this finish and such damage is not covered by the
New Vehicle Limited Warranty. HAND WASH ONLY
USING MILD SOAP AND WATER WITH A SOFT CLOTH.
Used on a regular basis; this is all that is required to
maintain this finish.
Trim Level 4x4
SPORT
OVERLAND
MOJAVE
RUBICON
SUMMIT

SNOW TRACTION DEVICES

Use of traction devices require sufficient tire-to-body
clearance. Due to limited clearance, the following snow
traction devices are recommended. Follow these rec-
ommendations to guard against damage:
Snow traction device must be of proper size for the
tire, as recommended by the snow traction device
manufacturer.
No other tire sizes are recommended for use with
the snow traction device.
Please follow the table below for the recommended
tire size, axle and snow traction device:
Axle
REAR
Snow Traction Device (Maximum Pro-
Tire/Wheel Size
245/75R17
LT255/75R17C
275/55R20
275/70R18
LT285/70R17C
255/70R18
275/55R20
jection Beyond Tire Profile Or
Equivalent)
S Class AutoSock
AutoSock

Advertisement

Table of Contents
loading

Table of Contents