Table of Contents
Advertisement
If there is no vehicle ahead, the vehicle will maintain
the set speed. If a slower moving vehicle is detected in
the same lane, the instrument cluster displays the ACC
Set with Target Indicator Light, and the system adjusts
vehicle speed automatically to maintain the distance
setting, regardless of the set speed.
The vehicle will then maintain the set distance until:
•
The vehicle ahead accelerates to a speed above the
set speed
•
The vehicle ahead moves out of your lane or view of
the sensor
•
The distance setting is changed
•
The system disengages
page 138
The maximum braking applied by ACC is limited; how-
ever, the driver can always apply the brakes manually, if
necessary.
NOTE:
The brake lights will illuminate whenever the ACC sys-
tem applies the brakes.
A Proximity Warning will alert the driver if ACC predicts
that its maximum braking level is not sufficient to main-
tain the set distance. If this occurs, a visual alert
"BRAKE!" will flash in the instrument cluster display
and a chime will sound while ACC continues to apply its
maximum braking capacity.
NOTE:
The "BRAKE!" screen in the instrument cluster display
is a warning for the driver to take action and does not
necessarily mean that the Forward Collision Warning
system is applying the brakes autonomously.
Overtake Aid
When driving with ACC engaged and following a vehicle,
the system will provide an additional acceleration up to
the ACC set speed to assist in passing the vehicle. This
additional acceleration is triggered when the driver uti-
lizes the left turn signal and will only be active when
passing on the left hand side.
ACC Operation At A Stop (Automatic
Transmission Only)
In the event that the ACC system brings your vehicle to
a standstill while following the vehicle in front, your
vehicle will resume motion without the need for any
driver action if the vehicle in front starts moving within
two seconds of your vehicle coming to a standstill.
If the vehicle in front does not start moving within two
seconds of your vehicle coming to a standstill, the ACC
with Stop system will cancel and the brakes will
release. A cancel message will display on the instru-
ment cluster display and produce a warning chime.
Driver intervention will be required at this moment.
While ACC with Stop is holding your vehicle at a stand-
still, if the driver seat belt is unbuckled or the driver
door is opened, the ACC with Stop system will cancel
and the brakes will release. A cancel message will dis-
play on the instrument cluster display and produce a
warning chime. Driver intervention will be required at
this moment.
STARTING AND OPERATING
WARNING!
When the ACC system is resumed, the driver must
ensure that there are no pedestrians, vehicles or
objects in the path of the vehicle. Failure to follow
these warnings can result in a collision and death or
serious personal injury.
Display Warnings And Maintenance
"WIPE FRONT RADAR SENSOR IN FRONT OF
VEHICLE" WARNING
The "ACC/FCW Unavailable Wipe Front Radar Sensor"
warning will display and a chime will sound when condi-
tions temporarily limit system performance.
This most often occurs at times of poor visibility, such
as in snow or heavy rain. The ACC system may also
become temporarily blinded due to obstructions, such
as mud, dirt or ice. In these cases, the instrument clus-
ter display will display the above message and the sys-
tem will deactivate.
This message can sometimes be displayed while driving
in highly reflective areas (i.e. ice and snow, or tunnels
with reflective tiles). The ACC system will recover after
the vehicle has left these areas. Under rare conditions,
when the radar is not tracking any vehicles or objects in
its path this warning may temporarily occur.
NOTE:
If the "ACC/FCW Unavailable Wipe Front Radar Sensor"
warning is active, Fixed Speed Cruise Control is still
available.
141
4
Advertisement
Table of Contents
