Table of Contents
Advertisement
2. Using a #T50 Torx head driver, secure the fasteners
to the bed.
3. Lower the tailgate to the fully open position before
unrolling the Tonneau Cover.
4. Release the stowage straps used to secure the Ton-
neau Cover in the rolled up position.
Release Stowage Strap
5. Roll the Tonneau Cover rearward toward the back of
the truck bed.
Roll Tonneau Cover Rearward
6. Position both Tonneau Cover latches over the lock-
ing mechanisms (one on each side of the truck
bed), making sure the plastic retainer is correctly
seated in the forward part of the latch.
Correctly Seated Retainer
Incorrectly Seated Retainer
GETTING TO KNOW YOUR VEHICLE
7. Once the rear Tonneau Cover bar is positioned over
the locking mechanism, grab the back of the Ton-
neau Cover and push downward on the center to
engage the locking mechanisms. Make sure an
audible "click" from both sides of the Tonneau Cover
is heard to confirm that the latch is completely
engaged.
Push Downward To Lock
NOTE:
If desired, the Tonneau Cover can be left in this
position (rear panel folded forward) while the tail-
gate is closed, or the tailgate can be raised to the
mid-position
page 92.
95
2
Advertisement
Table of Contents
