Table of Contents
Advertisement
Administrator Information
3. Enter the time server address for Time Server Address.
You can use IPv4, IPv6 or FQDN format. Enter 252 characters or less. If you do not specify this, leave it blank.
4. Enter Update Interval (min).
You can set up to 10,080 minutes by the minute.
5. Click OK.
Note:
You can confirm the connection status with the time server on Time Server Status.
Setting the Default Value for Scanning and Copying (User Default Settings)
You can set the default value for the following functions.
❏ Scan to Network Folder/FTP
❏ Scan to Email
❏ Scan to Memory Device
❏ Scan to Cloud
❏ Copy
1. Access Web Config and select the functions for which you want to set the default value for the Scan/Copy tab
> User Default Settings.
2. Set each item.
3. Click OK.
If the combination of the value is invalid, it is automatically modified, and then a valid value is set.
Problems when Making Settings
Hints to Solving Problems
❏ Checking the error message
When trouble has occurred, first check whether there are any messages on the printer's control panel or driver
screen. If you have the notification email set when the events occur, you can promptly learn the status.
❏ Network connection report
Diagnose the network and the printer status, and then print the result.
You can find the diagnosed error from the printer side.
❏ Checking the communication status
Check the communication status of server computer or client computer by using the command such as ping
and ipconfig.
❏ Connection test
For checking the connection between the printer to the mail server, perform the connection test from the
printer. Also, check the connection from the client computer to the server to check the communication status.
>
Settings to Use the Printer
327
>
Problems when Making Settings
Advertisement
Table of Contents
