4. Install the two hex-head bolts and torque to
60-in. pounds.
Clutch
Clutch
Spring
Flat
Washer
Reinstalling Direct Drive Mode Shifter
1. Install the flat washer onto the lower
transmission shaft.
2. Install the clutch spring.
3. Slide the clutch into the clutch level of the
mode shifter and slide the clutch onto the
shaft. There are guide tabs on the bottom of
the mode shifter that go into locator holes on
the platform.
4. Install the two hex-head bolts and torque to
60-in. pounds.
Guide
Pins
Clutch
Locator
Spring
Holes
Flat
Washer
– 50 –
Clutch
Guide
Tabs
Locator Holes