Table of Contents
Advertisement
X
Remove flat-blade screwdriver ; and
replace it in the vehicle tool kit.
X
Vehicles with ClassicSpace cab: refit pro-
tective cap :.
Roof hatch
You can open the roof hatch at one end (at the
front or rear) or at both ends (at the front and
rear).
X
Push the roof hatch up or pull it down by
handles :.
Roller sunblind
If you switch the ignition lock into drive posi-
tion while the roller sunblinds are not in the
extreme upper position, a reference run
starts and the roller sunblinds are retracted
completely.
X
Switch the ignition lock to the drive posi-
tion.
X
To extend: briefly press the ¥ or §
button downwards.
The roller sunblinds extend to the extreme
position.
or
X
Press the ¥ or § button downwards
until the corresponding roller sunblind has
reached the desired position.
X
To retract: briefly push the ¤ or ¦
button upwards.
The roller sunblinds are retracted to the
extreme position.
or
X
Push the ¤ or ¦ button upwards
until the corresponding roller sunblind has
reached the desired position.
If an error has occurred and you press the
i
button, the roller sunblind carries out a ref-
erence run. The roller sunblind is retracted
into the extreme upper position at a slower
speed than normal. The roller sunblind is
now ready for normal operation.
X
If a reference run is interrupted, press the
¥ or § button and then press the
¤ or ¦ button immediately after-
wards.
The roller sunblind is retracted to the
extreme upper position.
Roller sunblind
Z
75
Advertisement
Chapters
Table of Contents
