Mercedes-Benz Actros Operating Instructions Manual page 108

Lighting system
106
Brake lamp
?
Reversing lamp
A
Rear lamps
B
Rear foglamp
C
The licence plate lamp is behind the reflector
unit.
If the vehicle lamp cluster unit has LED mod-
ules, do not replace the bulbs in the turn sig-
nals, tail lamps, brake lamps or perimeter
lamps. If necessary, have these bulbs
replaced at a qualified specialist workshop.
Observe the notes on replacing bulbs
Y
( page 99).
X
Remove bolts :.
X
Remove the lamp lens.
X
Turn the bulb anti-clockwise, applying light
pressure, and remove it.
X
Insert the new bulb and turn clockwise,
applying light pressure.
Interior lighting
Interior lighting/reading lamp
Observe the notes on replacing bulbs
( Y page 99).
X
Prise off the lamp lens with a screwdriver.
X
Interior lighting :/nightlight ;/reading
lamp =: turn the bulb anti-clockwise,
applying light pressure, and remove it.
X
Insert the new bulb and turn clockwise,
applying light pressure.
Reading lamp: bed/berth
Reading lamp: bed/berth
Observe the notes on replacing bulbs
( Y page 99).
X
Prise the lamp lens out of the pivot hinge
using a screwdriver.
X
Remove the bulb.
X
Insert the new bulb.
Additional bulbs
Side marker lamps
Side marker lamps (example: platform truck)
Observe the notes on replacing bulbs
( Y page 99).
X
Press the retainer on cable connector ;
with a screwdriver and hold it.
X
Disconnect cable connector ;.
X
Press retainers : on side marker lamp =
together and hold in this position.
X
Replace side marker lamp =.