Table of Contents
Advertisement
Corner seat
:
Folding table
;
X
To adjust the head restraint: pull the
head restraint up or push it down to the
desired height.
X
To remove the head restraint: pull the
head restraint firmly up and out.
X
To fold down the folding table: fold out
supports = on folding table ; and
engage.
X
Unclip the retainer band from folding
table ;.
X
Fold down folding table ;.
Support = is in the recess on the side trim
panel of the drawers.
X
To fold up the folding table: fold up fold-
ing table ; and attach the retainer band to
folding table ;.
X
Fold in support =.
Beds in an L cab
Folding the bed down/up
G
WARNING
A vehicle occupant on the bed while the vehi-
cle is in motion cannot be restrained. There is
a risk of serious or even fatal injuries.
Only use the bed when the vehicle is station-
ary.
! Make sure that the bed does not hit the
seats when you fold it up or down. Swing or
fold the backrests of the driver's and co-
driver's seats forward or adjust the seats
further forward. The bed can otherwise hit
the seats and damage both components.
! Always leave the adjustable backrest in
the horizontal position during the journey.
If you fold up the adjustable backrest,
swing the backrest of the seat forwards or
move the seat forwards. Otherwise, the
adjustable backrest can hit the seat and
damage both components.
When resetting the seat position, make
sure that the adjustable backrest of the
lower bed is lowered completely.
! Do not leave any objects under the folded
up adjustable backrest. The adjustable
backrest or the bed could otherwise be
damaged when folded down.
X
If necessary, move the driver's seat suffi-
ciently forward.
X
Fold up folding table ;, attach the retainer
band to folding table ; and fold in the
support.
89
Z
Advertisement
Chapters
Table of Contents
