Table of Contents
Advertisement
On-board computer
160
Coolant menu window
X
Use the u or t button to scroll to ã
monitoring info.
X
To display the coolant temperature: use the
r or s button to scroll to the
ant
menu window.
If the coolant level is too low, the coolant
temperature cannot be displayed.
Events menu window
You can display stored malfunctions and mes-
Events
sages in the
fied the cause of the malfunction/message,
the on-board computer no longer displays the
event.
X
Use the u or t button to scroll to ã
monitoring info.
X
Use the r or s button to scroll to the
Events
menu window.
The menu window shows, for example, the
number of events.
X
To display an event: press 9.
X
To show further events: press r or
s.
Diagnostics menu window
Diagnostics data contains information with
which you can assist the workshop staff dur-
ing fault diagnosis, e. g. by remote diagnosis.
Diagnosis
The
example, a list of all control units (systems)
installed in the vehicle. You can obtain further
information from any Mercedes-Benz Service
Centre.
X
Use the u or t button to scroll to ã
monitoring info.
X
Use the r or s button to scroll to the
Diagnosis
menu window.
X
To display diagnostics data: press 9.
The input window shows a list of all control
unit system abbreviations.
menu. If you have recti-
menu window contains, for
X
Select the desired control unit using the
r or s button.
X
Display further details on the control unit by
pressing u.
Cool‐
Settings menu
Menu window menu
If you change the settings in the
window, the changes affect the display of the
menu window.
X
Use the u or t button to scroll to ä
settings.
X
To set the units of measurement: press
9.
The input window displays a list of possible
settings:
clock mode in
R
speed in
R
distance in
R
liquid units in litres,
R
temperature units in
R
average fuel consumption in
R
km/l
or
pressure units in
R
weight units in t,
R
X
Select the desired menu bar with the r
or s button.
X
Change the setting with the u or t
button.
Lighting menu window
You can set the brightness of the instrument
cluster, the switch and the audio display as
well as the delayed switch-off of the surround
lighting in the lighting menu window.
You can only adjust the brightness of the
instrument cluster and the switches if the
light sensor of the instrument cluster has
detected night mode and the lighting is
switched on. If the setting cannot be
changed, the input window displays
mode.
Menu
24h
12h
or
km/h
mph
or
km
mi
or
UK gal
°C
°F
or
l/100
mpg
bar/kpa
psi
or
tn
l.tn
or
menu
US gal
or
km,
Day
Advertisement
Chapters
Table of Contents
