On-Board Computer Event Window - Mercedes-Benz Actros Operating Instructions Manual

X
Use the r or s button to select
Crawler mode, EcoRoll
ATTENTION ASSIST
X
Press the u button to activate/deacti-
vate.
If you switch the ignition lock to position 0 for
several seconds, the following vehicle sys-
tems are automatically activated again:
Crawler mode
R
EcoRoll mode
R
ATTENTION ASSIST
R
PPC remains on or off after switching on the
ignition again.

On-board computer event window

Notes on events
Messages include operating information,
error messages or warnings that the on-board
computer automatically displays in an event
window. In addition to the event window, an
indicator lamp may light up in the instrument
cluster or in the status area of the on-board
computer.
Depending on the priority of the message, the
on-board computer displays the event win-
dow in different colours:
grey event window for a malfunction/
R
notification of low priority
Observe the instructions in the event win-
dow. You can drive on.
yellow event window for a malfunction/
R
notification of medium priority
Observe the instructions in the event win-
dow. If it is possible to continue the journey
despite the malfunction, drive on carefully.
Have the affected system checked at a
qualified specialist workshop as soon as
possible.
red event window for a malfunction of
R
high priority
Observe the instructions in the event win-
dow. Immediately stop the vehicle while
paying attention to the traffic conditions
mode, PPC,
Video popup.
or
On-board computer event window
and contact a qualified specialist work-
shop. If the qualified specialist workshop
determines it is possible to continue driv-
ing, adapt your driving style accordingly.
Drive with even greater care. Keep in mind
that continuing the journey could damage
the vehicle and contravene legal regula-
tions. Immediately drive to a qualified spe-
cialist workshop and have the affected sys-
tem checked and repaired.
If you can confirm the event window using the
9 button, the event window is hidden. You
can call up the event window again at a later
point ( Y page 160). If in addition to the event
window, an ( Y page 145) indicator lamp has lit
up in the instrument cluster or in the status
area of the on-board computer, the indicator
lamp remains on.
163
Z