Table of Contents
Advertisement
After emergency braking, the
braking finished
message appears in the
grey event window in the on-board computer.
After emergency braking, the vehicle is held
by the service brake for another 5 seconds to
prevent it from rolling away.
If an emergency braking manoeuvre has been
performed:
X
Remove the vehicle from the area of danger
as soon as possible while paying attention
to the traffic situation.
X
Stop the engine and apply the parking
brake to prevent the vehicle from rolling
away.
X
Make sure that the vehicle is in proper
operating order and that the load is secured
properly.
You can interrupt emergency braking as fol-
lows:
X
Press the l button.
or
X
Depress the accelerator pedal beyond the
point of resistance (kickdown).
Particular driving situations
Cornering, entering and exiting bends
The ability of Active Brake Assist and the dis-
tance control assistant to detect vehicles on
bends is limited. Active Brake Assist and the
distance control assistant may unexpectedly
issue warnings or brake your vehicle. The dis-
tance control assistant may also accelerate
the vehicle unexpectedly.
Emergency
Driving on a different line and stationary
vehicles
The ability of Active Brake Assist and the dis-
tance control assistant to detect vehicles
driving on a different line or stationary vehi-
cles is limited. Active Brake Assist and the
distance control assistant may unexpectedly
issue warnings or brake your vehicle. The dis-
tance control assistant may accelerate unex-
pectedly.
Other vehicles changing lane
The ability of Active Brake Assist and the dis-
tance control assistant to detect vehicles
pulling into your lane is limited. The distance
to the vehicle in front entering your lane may
then be too short. Active Brake Assist and the
distance control assistant may unexpectedly
issue warnings or brake your vehicle. The dis-
tance control assistant may also accelerate
the vehicle unexpectedly.
Driving systems
Z
281
Advertisement
Chapters
Table of Contents
