Table of Contents
Advertisement
688 Technical data
The overhang dimension and fastening points are
valid for a trailer hitch installed at the factory.
Missing values were not available at the time of
going to press.
Overhang dimension length
Model
All models
Trailer load
%
The tongue weight is not included in the trailer
load.
The values for the trailer load, braked apply
with a minimum start-off gradeability of 12 %.
Missing values were not available at the time of
going to press.
Trailer load, braked
Model
All models
Trailer load, unbraked
Model
All models
Maximum trailer hitch tongue weight‑ and load
2
Overhang
capacity
dimension
* NOTE Damage caused by the trailer com-
ing loose
If the tongue weight used is too low, the trailer
may come loose.
The tongue weight must not be below
#
50 kg.
Use a tongue weight that is as close as
#
possible to the maximum permissible
tongue weight.
F243 0059 02
* NOTE Damage caused by the bicycle rack
coming loose
When using a bicycle rack, both the maximal
tongue weight and the maximal load capacity
should be observed.
Do not exceed the permissible load
#
capacity.
Observe the additional notes on load capacity
(
page 344).
/
Missing values were not available at the time of
going to press.
Tongue weight
Model
Maximum tongue
All models
weight
Advertisement
Table of Contents
