Table of Contents
Advertisement
Maintain a distance of at least 70 cm between
the foil-covered parts of the vehicle and the
nozzle of the high-pressure cleaner. Move the
nozzle of the high-pressure cleaner around
while cleaning. The water temperature of the
high-pressure cleaner must not exceed 60°C.
Observe the information on the correct dis-
R
tance in the equipment manufacturer's oper-
ating instructions.
Do not direct the nozzle of the high-pressure
R
cleaner directly at sensitive parts, e.g. tyres,
gaps, electrical components, batteries, illumi-
nants or louvres.
Washing the vehicle by hand
Observe the relevant legal requirements (e.g. in
some countries, washing by hand is permitted
only in specially designated wash bays).
Use a mild cleaning agent (e.g. car shampoo).
#
Do not use acidic cleaning agents.
#
Wash the vehicle with lukewarm water using a
#
soft car sponge. When doing so, do not
expose the vehicle to direct sunlight.
Carefully hose the vehicle off with water and
#
dry using a chamois.
%
Observe the notes on the care of car parts
(
page 517).
/
Notes on paintwork/matt finish paintwork care
To avoid damaging the paintwork and interfering
with the driving assistance systems, please
observe the following notes:
Paint
Insect remains: soak with insect remover and
R
rinse off the treated areas afterwards.
Bird droppings: soak with water and rinse off
R
afterwards.
Tree resin, oils, fuels and greases: remove by
R
rubbing gently with a cloth soaked in petro-
leum ether or lighter fluid.
Coolant and brake fluid: remove with a damp
R
cloth and clean water.
Tar stains: use tar remover.
R
Wax: use silicone remover.
R
F243 0059 02
Maintenance and care 515
Do not attach stickers, foil or similar materials.
R
Only have foil attached to the bumper at a
qualified specialist workshop.
Remove dirt immediately, where possible. Do
R
not use acid solutions and acidic cleaners.
Matt finish
Only use care products approved for
R
Mercedes-Benz.
Do not attach stickers, foils or similar materi-
R
als. Only have foil attached to the bumper at a
qualified specialist workshop.
Do not polish the vehicle and light-alloy
R
wheels.
Only use car washes that correspond to the
R
latest engineering standards.
Do not use car wash programmes with a final
R
hot wax treatment.
Do not use paint cleaners, buffing or polishing
R
products, gloss preservers, e.g.wax.
In the event of paintwork damage:
Always have paintwork repairs carried out at a
R
qualified specialist workshop.
Advertisement
Table of Contents
