Table of Contents
Advertisement
Pull the ball neck in the direction of the arrow
#
until it engages audibly in a vertical position.
1
Indicator lamp
on the ball neck release
switch will go out.
If the ball neck is not securely locked in place,
the
Trailer coupling Check lock
appear on the driver's display.
Remove the cover cap from the ball head and
#
store it in a safe place.
Make sure that the ball on the ball neck is clean.
Check that it is either greased or dry (grease-
free), depending on the instructions for the trailer.
Folding the ball neck in
Pull switch
message will
#
The ball neck will fold up under the rear
bumper.
Indicator lamp
2
until the ball neck unlocks.
1
will flash.
F243 0059 02
Driving and parking 341
Push the ball neck in the direction of the
#
arrow until it engages audibly behind the
bumper.
Indicator lamp
1
will go out and the message
on the driver's display will disappear.
Observe the information about indicators on the
driver's display:
Indicator and warning lamps (
R
page 758)
/
Advertisement
Table of Contents
