Table of Contents
Advertisement
508 Maintenance and care
With your hand flat, push down active bonnet
#
1
in the area around the hinges on both
sides (arrows).
In doing so, the actuator is depressurised and
you may hear a hissing sound.
The engine bonnet must engage in position.
If active bonnet
1
can be raised slightly at
#
the rear in the area of the hinges, repeat the
step until it engages correctly.
Opening and closing the bonnet
& DANGER Risk of fatal injuries when carry-
ing out maintenance work during the
charging process
During the charging process, the high-voltage
on-board electrical system is under high volt-
age.
Do not perform any maintenance work
#
during the charging process.
& WARNING Risk of accident due to driving
with the bonnet unlocked
The bonnet may open and block your view.
Never release the bonnet when driving.
#
Before every trip, ensure that the engine
#
bonnet is locked.
& WARNING Risk of accident and injury
when opening and closing the bonnet
The bonnet may suddenly drop into the end
position.
F243 0059 02
There is a risk of injury for anyone in the
engine bonnet's range of movement.
Do not open or close the bonnet if there
#
is a person in the bonnet's range of
movement.
& WARNING Risk of injury due to overheated
vehicle
If you open the bonnet in the event of an over-
heated vehicle or fire in the engine compart-
ment, the following situations may occur:
You may come into contact with hot gases.
R
You may come into contact with other
R
escaping hot operating fluids.
In the event of overheating or fire in the
#
engine compartment, keep the bonnet
closed and call the fire service.
Allow the overheated vehicle to cool
#
down first if you need to open the bon-
net.
Advertisement
Table of Contents
