Notes On Assembling The Number Plate On The Front Licence Plate Holder - Mercedes-Benz CLS Operator's Manual

22 General notes
If the underbody panelling is damaged, flam-
mable materials such as leaves, grass or twigs
can collect between the underbody and the
underbody panelling. These materials may
ignite if they come into contact with hot parts
of the exhaust system.
Have the vehicle checked and repaired
#
immediately at a qualified specialist
workshop.
or
If driving safety is impaired while con-
#
tinuing your journey, pull over and stop
the vehicle immediately, while paying
attention to road and traffic conditions,
and contact a qualified specialist work-
shop.
Vehicles with a 48 V on-board electrical system
& DANGER Risk of fatal injury by touching
damaged high-voltage components
Vehicles with a 48 V on-board electrical sys-
tem contain individual high-voltage compo-
nents. These high-voltage components are
under high voltage.
If you modify component parts of these high-
voltage components or touch damaged com-
ponent parts, you may be electrocuted.
High voltage components may be damaged in
an accident, although the damage may not be
visible.
Never perform modifications to compo-
#
nent parts of high-voltage components.
Never touch damaged component parts
#
of high-voltage components.
Never touch component parts of high-
#
voltage components after an accident.
Vehicles with a 48 V on-board electrical system
contain high-voltage components. These compo-
nents are marked with a high-voltage label:
All work on high voltage components must be car-
ried out at a qualified specialist workshop.
Notes on assembling the number plate on the
front licence plate holder
* NOTE Malfunctions and system failures
due to incorrect assembly of the licence
plate on the front licence plate holder
If the licence plate is incorrectly assembled on
the front licence plate holder, sensors, cam-
eras or driving and safety systems may mal-
function or fail.