Mercedes-Benz EQB 2023 Owner's Manual page 345

In the following circumstances, a message may
appear on the driver's display even if the trailer
has been connected correctly:
LEDs have been installed in the trailer lighting
R
system.
The current has fallen below the trailer lighting
R
system's minimum current (50 mA).
%
Accessories can be connected to the perma-
nent power supply up to 180 W and to the
power supply that is switched on via the igni-
tion lock.
Uncoupling a trailer
& WARNING Risk of being crushed and
becoming trapped when uncoupling a
trailer
When uncoupling a trailer with an engaged
inertia-activated brake, your hand may
become trapped between the vehicle and the
trailer drawbar.
Do not uncouple trailers with an engaged
#
overrun brake.
* NOTE Damage during uncoupling with an
engaged overrun brake
The vehicle may be damaged if you uncouple
with an engaged overrun brake.
Do not uncouple trailers with an engaged
#
overrun brake.
Secure the vehicle against rolling away.
#
Disconnect the electrical connection between
#
the vehicle and the trailer.
Uncouple the trailer.
#
Place the cover on the ball head.
#
%
Trailers with LED lighting: after uncoupling the
trailer, switch the vehicle on and then off
again.
F243 0059 02
Driving and parking 343
Selecting a trailer type
Multimedia system:
© Settings Vehicle
4 5 5
Trailer type
5
Configuring settings for a trailer
The settings on this menu make it possible to cal-
culate a route suitable for the selected trailer and
optimise the calculated arrival time.
Select the desired trailer type.
#
Select the maximum permissible speed of the
#
selected trailer.
To save changes: select Confirm.
#
% When contact with the trailer socket is estab-
lished (trailer/rear bicycle rack), a menu will
automatically appear on the display.
The following options are available:
Bicycle rack
R
Small trailer
R
Large trailer
R
Driving
5