Generac Power Systems Power Zone Pro Sync Owner's Manual page 38

Troubleshooting
Alarm Display Text
NEED TO SET RTC
ENGINE RELAY INVALID SETTINGS
RPM1 SENSOR FAIL
RPM1 SENSOR FAIL SD
VOLTAGE MONITOR FAULT
VREF1 FAULT
VREF2 FAULT
INVALID AVR SETTINGS
INVALID GOV SETTINGS
ANALOG INPUT DEFINED MULTIPLE TIMES
DIGITAL INPUT DEFINED MULTIPLE TIMES
BUS VOLTAGE AB NOT SETUP
BUS VOLTAGE BC NOT SETUP
BUS VOLTAGE CA NOT SETUP
BUS VOLTAGE LL NOT SETUP
GEN CURRENT N NOT SETUP
GEN VOLTAGE AN NOT SETUP
GEN VOLTAGE BN NOT SETUP
GEN VOLTAGE CN NOT SETUP
GEN VOLTAGE AB NOT SETUP
GEN VOLTAGE BC NOT SETUP
34
Type Alarm Description
WN Real time clock needs to be set
SD Internal relay startup/shutdown control settings
are invalid
WN RPM Sensor is not reading valid RPM while the
engine is running, but frequency is present and
valid
SD RPM Sensor is not reading valid RPM while the
engine is running
SD Main Controller internal power supply voltage
monitor detected invalid voltage
SD Main Controller internal reference voltage
monitor detected invalid voltage
SD Main Controller internal reference voltage
monitor detected invalid voltage
SD AVR related settings are invalid and must be
changed
SD Governor related settings are invalid and must be
changed
SD Analog input function assigned to multiple analog
input sources
SD Digital input function assigned to multiple digital
input sources
SD See AI, AO, DI and DO XXX NOT SETUP
Alarms.
SD See AI, AO, DI and DO XXX NOT SETUP
Alarms.
SD See AI, AO, DI and DO XXX NOT SETUP
Alarms.
SD See AI, AO, DI and DO XXX NOT SETUP
Alarms.
SD See AI, AO, DI and DO XXX NOT SETUP
Alarms.
SD See AI, AO, DI and DO XXX NOT SETUP
Alarms.
SD See AI, AO, DI and DO XXX NOT SETUP
Alarms.
SD See AI, AO, DI and DO XXX NOT SETUP
Alarms.
SD See AI, AO, DI and DO XXX NOT SETUP
Alarms.
SD See AI, AO, DI and DO XXX NOT SETUP
Alarms.
Owner's Manual for Power Zone Pro Sync