Chapter 5 Using Policy Manager To Configure Your Network - Watchguard Firebox X1000 User Manual

Using Policy
CHAPTER 5
Manager to
Configure Your
Network
Normally, you incorporate the Firebox into your net-
work when you run the QuickSetup Wizard, as
described in "Running the QuickSetup Wizard" on
page 40. However, you can also create a basic configu-
ration file from scratch using several functions in Pol-
icy Manager.
Each of the procedures in this section can also be used
to override any settings you made using the Quick-
Setup Wizard. It is recommended that you follow
these steps in the following order to make sure that all
necessary information is provided (although not all
steps are required in all installations).
•
•
•
•
•
•
•
User Guide
Starting a new configuration file
Setting up Firebox interfaces
Adding secondary networks
Setting up DNS and WINS servers
Setting up the Firebox as a DHCP server
Adding the four basic services to Policy Manager
Configuring routes
57