Adding Addresses Or Users To Service Properties - Watchguard Firebox X1000 User Manual

Chapter 8: Configuring Filtered Services
Adding addresses or users to service
properties
Both the Incoming and Outgoing properties include From
and To address lists. Use the Add Address dialog box to
add a network, IP address, or specific user to a given ser-
vice.
1
In the Properties dialog box, use the Incoming service
Connections Are drop-down list to select Enabled and
Allowed.
2
Click either the Incoming tab or Outgoing tab. Click
the Add button underneath the From or the To list.
The Add Address dialog box appears, as shown in the following
figure.
3
Click Add Other.
The Add Member dialog box appears.
4 From the Choose Type drop-down list, click the type of
address, range, host name, or user you want to add.
5
In the Value text box, type the actual address, range, or
name. Click OK.
The member or address appears in the Selected Members and
Addresses list.
126 WatchGuard Firebox System