Configuring Windows Nt Server Authentication - Watchguard Firebox X1000 User Manual

Chapter 10: Creating Aliases and Implementing Authentication
7
When you finish adding the user to groups, click Add.
The user is added to the User list. The Setup Firebox User dialog
box remains open and cleared for entry of another user.
8 To close the Setup Firebox User dialog box, click
Close.
The Firebox Users tab appears with a list of the newly configured
users.
9
When you finish adding users and groups, click OK.
The users and groups can now be used to configure services and
authentication.
Configuring Windows NT Server
Authentication
Windows NT Server authentication is based on Windows
NT Server Users and Groups. It uses the Users and Groups
database already in place on your Windows NT network.
Only end users are allowed to authenticate; the default
Windows NT groups Administrators and Replicators will
not authenticate using this feature. From Policy Manager:
1
Select Setup => Authentication Servers.
The Authentication Servers dialog box appears.
2
Click the NT Server tab.
The information appears as shown in the following figure.
170 WatchGuard Firebox System