Hostwatch Display; Connecting Hostwatch To A Firebox - Watchguard Firebox X1000 User Manual

Chapter 6: Managing and Monitoring the Firebox

HostWatch display

As shown in the following figure, the upper pane of the
HostWatch display is split into two sides, Inside and Out-
side. Double-click an item on either side to produce a pop-
up window displaying detailed information about current
connections for the item, such as IP addresses, port num-
ber, connection type, and direction.
The lower pane displays the same information in tabular
form, in addition to ports and the time the connection was
established.

Connecting HostWatch to a Firebox

From HostWatch:
1
Select File = > Connect.
Or, on the Hostwatch toolbar, click the Connect icon
(shown at right).
2
Use the Firebox drop-down list to select a
Firebox.
You can also type the Firebox name or IP address.
98 WatchGuard Firebox System