Fluke 5730A Operator's Manual page 112

5730A
Operators Manual
CAL_ADJ
CAL_CHK
CAL_CLST?
CAL_CONF
CAL_CONF?
CAL_CONST?
CAL_COUNT?
CAL_DATE?
CAL_DAYS?
CAL_INTV
CAL_INTV?
CAL_PASSWD
CAL_REF
CAL_RCSV?
CAL_RNG
CAL_RPT?
CAL_SECURE
CAL_SECURE?
CAL_SHIFT?
CAL_SLST?
CAL_STORE
CAL_TEMP
CAL_TEMP?
CAL_USB
CAL_WBFLAT
CAL_WBGAIN
CAL_ZERO
DIAG
6-14
Table 6-4. Command Summary by Function (cont.)
Calibration, Testing, and Diagnostics Commands for the Calibrator
Does the internal portion of calibration
Starts calibration check
Returns a group of calibration constant names and their values
Sets the calibration specifications to a confidence level of either 95 % or
99 %
Returns the current calibration confidence level
Returns the value of a particular constant
Number of times the Calibrator has been unsecured
Returns the date of the most recent calibration
Returns the days elapsed since last calibration recall
Sets the calibration interval
Returns the calibration interval
Change the calibration passcode
Does a calibration procedure with a 1 Ω, 10 kΩ, or 10 V standard
Returns a comma-separated-value format report similar to what is saved on
a USB flash drive
Starts a self-calibration procedure of a range
Returns a formatted calibration report
Locks/unlocks calibration security
Gets lock state of calibration security
Returns the shift of a range due to a calibration action
Returns the shifts of a group of ranges
Stores new calibration constants in nonvolatile memory
Sets the temperature for calibration
Returns the calibration temperature last specified
Saves the calibration report to a USB flash drive
Does Wideband AC Module (Option 5730A/03 or 5730A/05) flatness
calibration
Does Wideband AC Module (Option 5730A/03 or 5730A/05) gain calibration
Does internal zeros calibration
Runs self-diagnostics