Carrier 40TGV0131UP Service Manual page 98

No. Part name
Float switch
9
1. Detachment
assembly
1) Carry out works of item 1 of 7 and
2) Remove the fixing screw and the
2. Attachment
1) Mount the float switch assembly a
NOTE :
When mounting, match hole of the float
switch assembly with projection of the drain
pan.
2) Mount the bell mouth as before.
3) Following to works of item 2 of 7 and
Drain pan
!
1. Detachment
1) Carry out works of item 1 of 4, item
2) Remove the fixing screws to remove th
2. Attachment
1) Fix parts as before in order of drain cap
2) Following to works of item 2 of 7 and
Procedure
works from 1) to 5).
remove the float switch assembly
(Ø4 × 25, 1 pc.)
before with the fixing screw
(Ø4 × 10, 8 pcs.)
works from 2) to 5), attach the parts as
before.
1 of 6, item 1 of 7 and works from
2) to 5).
drain pan. (Ø4 × 10, 4 pcs.)
→ drain pan → bell mouth.
works from 2) to 5), attach parts as
before.
Projection of drain pan Projection of drain pan Projection of dr
Fixing screws (Ø4 × 10)
- 98 -
Remarks
Float switch assembly Float switch assemb Float s witch assembly
Fixing screw (Ø4 × 25) Fixing screw ( Fixing scre w (Ø4 × 25)
Hole of float switch assembly
ain pan
Fixing screws (Ø4 ×10) Fixing screws ( Fixing scre ws (Ø4 ×10) 10)
25)