Carrier 40TGV0131UP Service Manual page 79

9-1-6. How to set up type of swing
1
Push for 4 seconds or more during
stop of the operation.
• flashes
2
Push (At the left side of the button)
and select the unit to be selected.
• Every pushing the button, the unit No. changes.
UNIT No.
1–1
UNIT No.
No display
The fan of the selected unit rotates and the louver
swings.
3
Using
type of the swing.
Swing setup code
Swing setup code
0001 Standard swing (At shipment)
0002
0003
REQUIREMENT
• Do not set 0000. (Louver may cause a trouble.)
4
Push .
5
Push to finish the setup.
* Standard swing
Four louvers swing simultaneously with the
same angel.
UNIT No. UNIT No.
2–1 3–1
UNIT No.
4–1
/ buttons, select
Louver operation
Dual swing
Cycle swing
Swing Swing
* Dual swing
(Recommended for heating operation)
• The adjoined louvers repeat horizontal discharge/
Downward discharge alternately to clear
irregularity of the temperature.
• The vertical discharge spreads hot air to the floor
and the horizontal discharge stirs. Both suppress
the temperature irregularity.
Horizontal Hor ontal
Horizontal
discharge discharge discharge
Do Downw Downward wnward ard
discharge discharge discharge
Horizontal Hor Horizontal ontal
discharge discharge discharge
Downward Downw Do wnward
discharge discharge discharge
* Cycle swing
(Recommended for cooling operation)
• 4 louvers swing with time lag as if they heave.
- 79 -
Horizontal Horizontal Hor ontal
discharge discharge discharge
Downward Do Downw wnward ard
discharge discharge
Horizontal Horizontal Hor ontal
discharge discharge discharge
Downw Downward Do wnward
discharge discharge discharge