Carrier 40TGV0131UP Service Manual page 72

9-1-3. Function Selection Setup
<Procedure> Perform setting while the air conditioner stops.
1
Push + + buttons simultaneously for 4 seconds or more.
The first displayed unit No. is the master indoor unit address in the group control
In this time, fan and louver of the selected indoor unit operate.
2
Every pushing
displayed one after the other. In this time, fan and louver of the selected indoor unit only
operate.
3
Using the set temperature
4
Using the timer time
5
Push button. (OK if indication lights)
• To change the selected indoor unit, proceed to Procedure
• To change item to be set up, proceed to Procedure
6
Pushing button returns the status to the normal stop status.
button (button at left side), the indoor unit No. in the group control is
buttons, specify the item code (DN).
buttons, select the set data.
<Operation procedure>
2
.
3
.
- 72 -