Measure Edit - Yamaha QX5 Owner's Manual

MEASURE EDIT
This is where you perform operations on specified measures of track 1. In each job, the upper right corner will
display the amount of free memory (in 80 note blocks), max 250 blocks. The lower line of the display will show
which measures will be affected by the operation. To enter this mode, press [SHIFT] + [MEAS EDIT]. .
Free memory
SHIFT MEASURE
F: = 1>COPY 193 k
MEAS EDIT 0001..0001
Measure
Measure Edit has 10 jobs.
Select the job you want by pressing [JOB]. [SHIFT] + will step backwards.
SHIFT A E M
Lea eg k -
JOB JOB
2> DELETE 3> REMOVE a> SHIFT
10 > CREATE 9 >CRESCENDO 8> GATETIME 7 > VELOCITY 6 > TRANSPOSE
Set Parameters Press [CURSOR} to move the blinking cursor to the data you want to change, and
use «1> to change the data. Pressing [CURSOR] + {SHIFT| will move back-
wards.
1>COPY 193
0007..0016
Execute Once you have specified the operation, you need to Execute by pressing
ENTER]. The display will show "Executing" for a few seconds. P
START HS
1>COPY 193 1>COPY 193
= = i
0007..0016 Executing
ENTER
1>COPY 191
=
0007.. 0016 Ñ
As the above example shows, some operations will affect the amount of Free
Memory.
Copy the specified measures to the end of the track. You cannot set the second
1. COPY measure before the first.
1>COPY 191
0o0o01..0006
25