Event Edit - Yamaha QX5 Owner's Manual

EVENT EDIT
This is where you perform operations in track 1 on individual notes or other messages such as Sustain On/Off,
etc. (These are called "events".) The upper line of the display will show the position of the event, and the lower
line will show the event. To enter this mode, make sure that track 1 is on, and press [SHIFT] + [EVENT EDIT].
Position
— TET
SHIFT TEMPO
M=0002-01-24/96
—— —
EVENT EDIT
NOTE (1) E..2 051
a —— —
Event
You can step through track 1 searching for events, and then change them or move them back and forward in time.
Select between Search and Change by pressing [JOB].
Search
Beginning of track
<p
End of track
M=0001-01-00/96 « M=0002-01-24/96 = M=0095-01-00/96
TOP NOTE (1) E..2 051 END
EJ
=
F
Change
<a>
@=0002-01-24/96
NOTE (1) E..2 051
The cursor is blinking. Press [CURSOR] to move the blinking cursor, selecting
2. CHANGE what you will change ((SHIFT] + [CURSOR] to move back), and «a> to change
it. (Each type of event will have different categories of data.) By pressing
START], you can transmit the currently displayed note.
Move the event back and forth in time
M=0002-01-24/96
NOTE (1) E..2 025
—— —
Change the event, channel and data
When you want to change the position (timing) of an event, put the cursor on "M"
and use «r> to move back and forth by individual clocks. [SHIFT
+ < moves the event by beat.