Yamaha QX5 Owner's Manual page 39

SETUP
This is where you change various settings of the QX5. Settings you make are remembered even when the power
is turned off, and four different setups can be stored and recalled (see p. 37). To enter this mode, double-click
TEMPO.
(Press twice)
C4 1>BEAT/MEASURE
EVENT EDIT 047/04
There are 6 jobs in Setup. Move through them by pressing [JOB], or [SHIFT] + to move back.
SHIFT ED EJ
ett CIJ»
JOB JOB
* 1 > BEAT/MEAS 2 > CLICK
This is where you set the time signature. If you are recording with no other tracks
1. BEAT/MEASURE
playing back, this time signature is what determines how Measure Marks are re-
corded. Beat/Measure also will determine how the metronome sounds (see Click,
below).
1>BEAT/MEASURE
© 04/704
1-32 4,8,16
iaa You can set the metronome to sound during recording and playback, only during
2. CLICK recording, or to be turned on and off manually (by pressing [SHIFT] + [CLICK]).
In any setting, you can always turn it on/off by pressing [SHIFT] + [CLICK]. There
will be an accent on the first beat of the measure.
2>CLICK
REC/PLAY
Manual, Record, Rec/Play
When Repeat is on and the song reaches the end during playback, it will start again
3. REPEAT from the beginning.
3>REPEAT
OFF
Off/On
38