Yamaha QX5 Owner's Manual page 15

` Track On/Off
Track Mute
CLOCK
Internal Clock
MIDI Clock
Tape Clock
Clock Out
While stopped, you can switch tracks 1-8 On or Off. (This will automatically return
you to measure 1.) When a track that contains data is turned on, its number will
be displayed. When a track that has no data (or has come to the end of it) is switched
on, a "*" is displayed. As you near the end of a multi-track composition, the track
numbers will change to "*" as they run out of data. in the example below, tracks
1-5 are on, but tracks 3 and 5 have no more data.
PLAY TR=12x*4%...
Trl Tr2 Tr3 Tra
During playback, you can switch tracks between On and Mute (indicated by
"_*). A Muted track will not send data. When is pressed or the data in
the track ends, Muted tracks are reset to On. In the example below (during playback),
tracks 1,2,3 and 8 still have data, but only 3 and 8 are playing.
PLAY TR= _3%%*..8
Trl Tr2 Tr8 Tr4@
Press [CLOCK] and use [F2]-[F4] to select the master timing clock for the QX5.
CLOCK IN=INT
Tape Midi Int
S) A 4
The QX5 internal clock determines the tempo. When [INT] is selected, you can
change the tempo from the QX5 panel keys (p. 7).
A MIDI clock-producing device (rhythm programmer, sequencer, etc.) connected
to the QX5 MIDI IN will determine the tempo.
An FSK tape sync signal received at the Tape In jack will determine the tempo.
(See Tape Sync, p. 47.)
You can choose whether or not to transmit clock (timing) data from MIDI OUT
and Tape Out. Hold down [SHIFT] and use and to turn Clock Out off
and on.
CLOCK OUT=OFF
Off On
SHIFT
5 S A
14