Yamaha QX5 Owner's Manual page 20

Shift + Tempo Delete one measure.
(Delete Measure)
Shift + Track Insert a Measure mark (p. 24) at the current position. This function can be used
(Insert Measure Mark) to input complex time signatures.
Shift + Clock Fill the remaining part of the measure with rests.
(Fill Rests)
For quick input of Gate Time, Velocity, Tie and Rest, you can specify a MIDI
QUICK INPUT VIA controller to input the data from a DX or KX keyboard. Press to get the display
MIDI you want, and use «1> to select the MIDI control number that you will use to ;
input the data. When "Off" is selected, the data can be set only from the QX5.
For example, if you select contro! number 6 for Gate Time, moving a DX7 Data
Entry Slider will adjust Gate Time. You might set Modulation Wheel (control number
1) to adjust Velocity, Data Entry —1/No (control number 97) to input a Tie, and
Data Entry +1/Yes (control number 96) to input a Rest. You will see the QX5 Gate
Time and Velocity display change as you move the controller.
SHIFT
a | an, Cc
pete ote. el TIME pore sie
ee 63 —— i
3>TIE 4>REST |
097 096
OFF, 64-121 OFF, 64-121
There is a table of MIDI control numbers on p. 22.
NOTE
Gate Time can be adjusted via MIDI over a range of 10% to 95%. To set Gate
Times of 100%-300%, use the QX5 front panel switches.