Front/Rear Panel - Yamaha QX5 Owner's Manual

FRONT PANEL
LCD
TEMPO
MEASURE
TRACK
CLOCK
DISPLAY (CLICK)
FRONT/REAR PANEL
DELETE STEP BACK TE REST
oa
dod
MEASURE TRACK CLOCK _ DISPLAY AUTO LOCATE
Hija
MEAS EDIT "ea a 9 RESET
SHIFT
TEMPO
c osc C4
"CURSOR 7 >
AEC MODE
A two-row 16-character Liquid Crystal Display, backlit for high visibility.
* The Job Guide on p. 6 describes the functions of the following 4
switches when pressed with [SHIFT] and when double-clicked.
Display and change the current tempo. The LED blinks to indicate the current tempo.
While [SHIFT] is pressed, you can recall and set the Tempo Memories.
Move through the measures of a song (fast forward and rewind). While (SHIFT
is pressed, you can recall and set the Measure Memories.
Each track can be switched on or off. {F1]-[F4] switch tracks 1-4. While
SHIFT] is pressed, [F1]-[F4] switch tracks 5-8.
The QX5 can be controlled by its own internal clock, MIDI clock, or tape (FSK)
clock. While [SHIFT] is pressed, the Clock Output can be turned on or off.
Select display mode. Tempo, Measure, Track and Clock can each have their own
display (with help message) or all be shown in one display (no help messages).
When pressed with [SHIFT], the click is turned on or off.
AUTO LOCATE (RESET) When this is on, pressing [START] will begin recording or playback from the measure
RECORD (REC MODE)
STOP/CONTINUE
in the first (left) Measure Memory. The LED indicates Autolocator On. You can
loop between the current measure and the first Measure Memory by pressing
SHIFT] + [START]. By pressing [SHIFT] with this switch, you can abort the current
operation.
Enter record mode. When [RECORD] is pressed with [SHIFT], the Record Mode
will change.
Stop recording or play. If pressed again, play will continue from that point. If pressed
after [RECORD], recording wil! begin from that point.
N
l