Redial Key; Hold/Pause Key; Conf/Clear (Conference/Clear) Key; Int.com/Delete (Intercom/Delete) Key - VTech vt2910 User Manual

HANDSET FEATURES

REDIAL KEY

Press this key to display and/or dial the
last number you called.
When the Handset is On (with dial tone),
press this key to dial the last number
called.
When the Handset is Off, pressing this
key will display the last dialed phone
number on the LCD. You can then press
a LINE key, and the displayed number
will be dialed. If you do not wish to dial,
press OFF to exit the REDIAL mode.

HOLD/PAUSE KEY

Press this key when the Handset is on
one or both lines to place the call(s) on
Hold.
Press the appropriate Line key to cancel
Hold. If both lines are on Hold, press
the CONF/CLEAR key to cancel Hold
and return to the Conference Call.
NOTE: Pressing OFF or HOLD/PAUSE
will not cancel Hold.
Press this key to insert a 2 second
pause as you program phone number
into MEMORY DIALING. See TO
STORE A NUMBER INTO MEMORY.
CONFERENCE/CLEAR (CONF/
CLEAR) KEY
Press this key to CONFERENCE a
call on LINE 1 and a call on LINE 2
s i m u l t a n e o u s l y . To
CONFERENCE mode,the Handset
must be inone of the following
conditions.
VT2910C EN MANU
1. LINE 1 is on a call and LINE 2 is on
HOLD
2. LINE 2 is on a call and LINE 1 is on
HOLD
3. Both lines are on HOLD.
NOTE: While in CONFERENCE mode,
MEMORY DIALING numbers and CID
records cannot be accessed.
While the Handset is Off, press this key
for more than 1 second to clear the LCD
display. This is helpful if you should
misdial during MEMORY programming.
While in CID or MEMORY DIALING
mode, press this key for more than 1
second to delete the entire contents of
the list you're examining. The LCD will
prompt you to press the INTERCOM/
DEL key to confirm your decision.
INTERCOM/DELETE KEY
While the Handset is Off or when a line
is on Hold, press this key to enter the
INTERCOM mode with the Base Unit.
Press OFF to exit the INTERCOM
mode.
While the Handset is Off, press and hold
this key for more than 1 second to delete
the last digit entered, as reflected by the
LCD display. This is comparable to a
Backspace function on a keyboard. If
you continue to hold the INTERCOM/
DEL key, the backspace function will
continue.
e n t e r
12
12 12/16/99, 6:16 AM