Find Handset; Redial List; Review A Redial List Entry; Dial A Redial List Entry - VTech CS6114-2 User Manual

Find handset

Use this feature to find the system handset.
To start paging:
• Press /FIND HANDSET on the
telephone base when not in use.
All idle handsets ring and display
** Paging **.
To end paging:
• Press /FIND HANDSET at the
telephone base.
-OR-
• Press or any of the dialing keys on
the handset.
NOTES
• Press MUTE to turn off the ringer of a
handset temporarily. Paging tone continues
on the other handset.
• Do not press and hold /FIND HANDSET
for more than four seconds. It may lead
to handset deregistration. If the handset
displays To register HS and See manual,
refer to the Register a handset section to
register the handset back to the telephone
base.

Redial list

Each handset stores the last five telephone
numbers dialed. Entries are shown in
reverse chronological order. When there
are already five entries, the oldest entry is
deleted to make room for the new entry.

Review a redial list entry

1. Press REDIAL when the handset is not
in use.
2. Press q, p or REDIAL repeatedly until
the desired entry displays.

Dial a redial list entry

1. Press REDIAL when the handset is not
in use.
2. Press q, p or REDIAL repeatedly until
the desired entry displays.
3. Press to dial.
-OR-
1. Press when the handset is not in
use.
2. Press REDIAL and then press q, p or
REDIAL repeatedly until the desired
entry displays.
3. Press SELECT to dial.

Delete a redial list entry

1. Press REDIAL when the handset is not
in use.
2. Press q, p or REDIAL repeatedly to
browse to the desired entry.
3. Press DELETE to delete the displayed
number. You hear a confirmation tone.

Directory

The directory can store up to 30 entries,
which are shared by all handsets. Each
entry may consist of a telephone number
up to 30 digits, and a name up to
15 characters.
Each handset directory is independent
(for multiple handset models only). Any
additions, deletions or edits made on
one handset are not reflected on other
handsets.
If the telephone number in the directory
exceeds 15 digits, a dash appears after
the 14th digit and then the remaining
digits are shown beginning with a dash,
alternately.
10

Add a directory entry

1. Enter the number when the phone is
not in use. Press MENU, then go to
Step 3.
-OR-
Press MENU when the phone is not
in use, then press SELECT to choose
Directory. Press SELECT again to
choose Add contact.
2. When Enter number
Enter number
displays, use the
dialing keys to enter
the number.
-OR-
Copy a number from the redial list
by pressing REDIAL and then press
q, p or REDIAL repeatedly to select
a number. Press SELECT to copy the
number.
3. Press SELECT to move
Enter name
on to enter the name.
The handset displays
Enter name.
4. Use the dialing keys to enter the
name. Additional key presses show
other characters of that particular key.
The first character of every word is
capitalized.
5. Press SELECT to save. The handset
displays Saved and then you hear a
confirmation tone.
While entering names and numbers, you
can:
• Press DELETE to backspace and erase a
digit or character.
• Press and hold DELETE to erase the
entire entry.
• Press q or p to move the cursor to the
left or right.
• Press and hold PAUSE to insert a dialing
pause (for entering numbers only).
• Press 0 to add a space (for entering
names only).

Review a directory entry

Entries are sorted alphabetically.
1. Press when the phone is not in use.
2. Press q or p to browse through the
directory, or use the dialing keys to
start a name search.
-OR-
1. Press MENU when the handset is not
in use.
2. Press SELECT to choose Directory.
_
3. Press q or p to scroll to Review and
then press SELECT.
4. Press q or p to
p Review
q
browse.

Alphabetical search

1. Follow the steps in Review a directory
entry above to enter the directory.
2. Use the dialing keys to enter the
letter associated with the name. For
example, if you have entries for Jenny,
Jessie, Kristen and Laura in your
directory, press 5 (JKL) once to see
Jenny (when Jenny displays, press
q to see Jessie), twice to see Kristen,
or three times to see Laura. If there is
no name entry matching your search,
the next closest match in alphabetical
order appears. If necessary, press q or
p to browse.

Delete a directory entry

1. Search for the desired entry in the
directory (see Review a directory
entry or Alphabetical search).
2. When the desired entry appears, press
DELETE. The handset displays Delete
contact? and the number.
3. Press SELECT to confirm. The handset
displays Deleting ... and then Contact
deleted. You hear a confirmation tone.
11