BASIC OPERATION
Base Unit Paging Handset
When the INT.COM key is pressed on
the Base Unit, the Handset will ring
differently than its incoming call ring.
The LCD will display BASE PAGING
HANDSET, as well. The Handset user
can then do the following:
• Press INTERCOM. The Base Unit and
Handset are now in INTERCOM mode.
OR
• Press OFF. The alerting ring will stop.
OR
• Let the ringing continue. It will stop
after 5 rings.
Handset Paging Base Unit
When the INTERCOM key is pressed
on the Handset, the Base Unit rings
once , and then automatically enters
INTERCOM mode. The person at the
Base Unit does not need to press any
keys to respond to the Handset.
While in INTERCOM mode, either party
can press OFF to terminate this feature.
If a call comes in while your VT 2910c
is in INTERCOM mode, the Handset
and Base Unit will ring normally. Once
the appropriate LINE key is pressed on
either component, you will be connected
with the caller, and the INTERCOM
mode is terminated.
VT2910C EN MANU
24
24
12/16/99, 6:17 AM