Find Handset; Redial List; Review A Redial List Entry; Dial A Redial List Entry - VTech CS5319-15 User Manual

Find handset

This feature helps you find all system
handsets.
To start paging:
• Press /FIND HANDSET on the
telephone base.
All idle handsets ring and display
** Paging **.
To end paging:
• Press /FIND HANDSET again on
the telephone base.
-OR-
, OFF,
• Press
(0-9, or
,
-OR-
• Place the handset in the telephone
base or charger.
• Press MUTE to turn off the ringer of a
handset temporarily. Paging tone continues
on the other handset.
• Do not press and hold /FIND HANDSET
for more than four seconds. It may lead
to handset deregistration. If the handset
displays To register HS... and ...see
manual, refer to the Frequently asked
questions section to register the handset
back to the telephone base.
or any dialing key
) on the handset.

Redial list

Each handset stores the last
10 telephone numbers dialed. Entries
are shown in reverse chronological
order. When there are already
10 entries, the oldest entry is deleted to
make room for the new entry.

Review a redial list entry

1. Press REDIAL to enter the redial list.
, , or REDIAL repeatedly
2. Press
to browse until the desired entry
displays.
• You hear a double beep when you reach
the beginning or end of the redial list.

Dial a redial list entry

1. Press REDIAL to enter the redial list.
2. Press , , or REDIAL repeatedly
to browse until the desired entry
displays.
3. Press or
-OR-
1. Press or
2. Press REDIAL to enter the redial list.
3. Press , , or REDIAL repeatedly
to browse until the desired entry
displays.
4. Press SELECT to dial the displayed
number.

Delete a redial list entry

1. Press REDIAL to enter the redial list.
2. Press , , or REDIAL repeatedly
to browse until the desired entry
displays.
3. When the handset displays the number
you want to delete, press DELETE.
You hear a confirmation tone.
13
to dial.
to take the line.