Table of Contents
Advertisement
CID-CALLER ID
Caller ID data transmission is incomplete.
If this display appears often, contact your
local service provider.
DELETING CID RECORDS
Your VT 2910c stores the most recent 50
CID records in memory. When CID
memory is completely filled, the oldest
record is automatically deleted as a new
call is stored. Therefore, you do not have
to delete CID records manually. However,
if you want to delete CID records, follow
the steps listed below:
Deleting a single CID record
1. With the Handset OFF, press the
CALLER ID key. The most recent
call will be displayed on the LCD (Call
#01).
2. Press the * ( ) or # (
to the desired record.
3. Press and hold the INT.COM/DEL key
until the LCD displays
DELETING SINGLE CALL .
4. If you have other records to delete,
scroll to the desired record and
repeat the process.
5. Press OFF when done.
Deleting ALL CID records
1. With the Handset OFF, press the CID
key. The most recent call will be dis-
played on the LCD (Call #01).
2. Press and hold the CONF/CLEAR
key until the LCD displays DELETE
ALL? DEL TO ALLOW .
VT2910C EN MANU
3. Press INT.COM/DEL to confirm de-
letion of all CID records. The LCD
will display DELETING ALL CALLS .
Pressing any key other than
INT.COM/DEL cancel this operation.
DIALING FROM CID MEMORY
NOTE: Only the last 7 digits of the
phone number will be dialed from CID
memory. You can manually append
additional digits ("1" plus area code,
for example) to the number prior to
dialing.
1. With the Handset OFF , press CALLER
ID.
2. Use the * (
to the desired CID record.
3. Press the desired LINE key.The
number associated with the CID record
willbe dialed (last 7 digits only).
)keys to scroll
Adding digits for CID dialing
For example, if the CID record is:
only 643-8981 will be dialed when the
LINE key is pressed. To dial 1(503)643-
8981 , do the following:
1. With the Handset OFF, enter 1503.
2. Press CID.
3. Use the * (
to the CID record.
4. Press the desired LINE key. The
number dialed will include the long
distance "1" plus the area code.
29
29
) or # (
) keys to scroll
) or # (
) key to scroll
12/16/99, 6:18 AM
Advertisement
Table of Contents
