Flex I/O Card Port Module Srx-Ioc-4Xge-Xfp Specifications - Juniper SRX5400 Reference

LEDs OK/FAIL LED, one bicolor:
•
•
•
LINK LED, single color, one per port:
•
•
TX/RX LED, single color, one per port:
•
•
Serial Number The serial number label is located as shown in
Location
Figure 16: Port Module SRX-IOC-16GE-TX Serial Number Label

Flex I/O Card Port Module SRX-IOC-4XGE-XFP Specifications

You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of small form-factor
pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and copper ports to your firewall to suit
the specific needs of your network. The SRX-IOC-4XGE-XFP port module
installs into a Flex IOC to add four 10-Gigabit Ethernet XFP ports.
Steady green–The port module is operating normally.
Red–The port module has failed and is not operating normally.
Off–The port module is powered down.
Steady green–The link is active.
Off–No link.
Blinking green–The port is receiving or transmitting data.
Off–No activity.
Figure 16 on page 38.
(Figure 17 on page
38
39)