Flex I/O Card Port Module Srx-Ioc-16Ge-Tx Specifications - Juniper SRX5400 Reference

LEDs OK/FAIL LED, one bicolor:
•
Steady green–The port module is operating normally.
•
Red–The port module has failed and is not operating normally.
•
Off–The port module is powered down.
LINK LED, single color, one per port:
•
Steady green–The link is active.
•
Off–No link.
TX/RX LED, single color, one per port:
•
Blinking Green–The port is receiving or transmitting data.
•
Off–No activity.
Serial Number The serial number label is located as shown in
Location
Figure 14: Port Module SRX-IOC-16GE-SFP Serial Number Label

Flex I/O Card Port Module SRX-IOC-16GE-TX Specifications

You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of small form-factor
pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and copper ports to your firewall to suit
the specific needs of your network. The SRX-IOC-16GE-TX port module
into a Flex IOC to add sixteen 10/100/1000 Ethernet RJ-45 copper ports.
Figure 14 on page 36.
(Figure 15 on page
36
37) installs