Handling An Srx5400, Srx5600, Or Srx5800 Firewall Card - Juniper SRX5400 Reference

Firewall card reference
Hide thumbs Also See for SRX5400:
Table of Contents

Advertisement

Figure 48: Card Edges
RELATED DOCUMENTATION
Cards Supported on SRX5400, SRX5600, and SRX5800 Firewalls

Handling an SRX5400, SRX5600, or SRX5800 Firewall Card

When carrying a card, you can hold it either vertically or horizontally.
NOTE: A card weighs up to 18.3 lb (8.3 kg). Be prepared to accept the full weight of the card as
you lift it.
To hold a card vertically:
1. Orient the card so that the faceplate faces you. To verify orientation, confirm that the text on the
card is right-side up and the EMI strip is on the right-hand side.
2. Place one hand around the card faceplate about a quarter of the way down from the top edge. To
avoid deforming the EMI shielding strip, do not press hard on it.
3. Place your other hand at the bottom edge of the card.
If the card is horizontal before you grasp it, place your left hand around the faceplate and your right
hand along the bottom edge.
102

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srx5600Srx5800

Table of Contents