Srx5K-Mpc3-40G10G Specifications - Juniper SRX5400 Reference
Firewall card reference
Hide thumbs
Also See for SRX5400:
- Hardware manual (438 pages) ,
- Manual (102 pages) ,
- Getting started manual (34 pages)
Table of Contents
Advertisement
LEDs
Serial number location
SRX5K-MPC3-40G10G Specifications
The SRX5K-MPC3-40G10G (IOC3) is an interface card that provides 10 Gigabit Ethernet and 40 Gigabit
Ethernet interfaces, with a Packet Forwarding Engine that provides a 240 Gbps line rate. This interface
card is supported on SRX5400, SRX5600, and SRX5800 Firewalls. See
OK/FAIL LED, one bicolor:
•
Green–The MIC is operating normally.
•
Red–The MIC has failed and is not operating normally.
•
Off–The MIC is powered down.
LINK LED, single color, one per QSFP+ port:
•
Green–The link is active.
•
Off–No link.
The serial number label is yellow and typically located as shown in
Figure 29 on page
58.
Figure 29: SRX-MIC-2X40G-QSFP Serial Number Label
Figure 30 on page
59.
58
Advertisement
Table of Contents
