Replenishing Forms - IBM 5225 1 Operator's Manual

Replenishing Forms
Follow these steps to replenish forms when the printer has run out of forms:
Step 1
D
Press the Stop Reset key.
Stop Reset
Step 2
One Line
If
"E" clears, press the
D
Start key.
Start
Step 3
Repeat Steps 1 and 2 until
"E" will not clear.
(This enables you to print
to the end of the page.)
Step4
Load the Forms (if necessary,
see "Loading Forms" in
Chapter 3).
Step 5
Adjust or check the thickness
control for the correct setting (if
necessary, see "C. Adjusting the
Thickness Control" in Chapter 3).
Step 6
One Line
Press the Start key.
D
Start
5-6 GA34-0054