IBM 5225 1 Operator's Manual page 44

7. Place the form's right margin holes over the right tractor pins. Close the trac-
tor cover and tighten the tractor locking knob.
Note: If forms are wider than 375 millimeters (14.8 inches), you may have to
readjust the left tractor.
8. Loosen the left tractor locking knob
CD
and move the left tractor until no
slack remains in the forms between the tractors. Tighten the locking knob.
Note: If you are using muiltipart forms, ensure that the tractor pins fit completely
through all the margin holes.
Loading and Unloading Forms 3-9