Replenishing Forms - IBM 5225 Operator's Manual

Replenishing Forms
Follow these steps to replenish forms when the printer has run out of forms:
Step 1
D
Press the Stop Reset key.
Stop Reset
Step2
One Line
If "E" clears, press the
D
Start key.
Start
Step3
Repeat Steps 1 and 2 until
"E" will not clear.
(This enables you to print
to the end of the page.)
Step4
Load the Forms (if necessary,
see "Loading Forms" in
Chapter 3).
Step5
Adjust or check the thickness
control for the correct setting (if
necessary, see "C. Adjusting the
Thickness Control" in Chapter 3).
Step 6
One Line
Press the Start key.
D
Start
5-6 GA34-0054