IBM 5225 1 Operator's Manual page 65

5-2 GA34-0054
This chapter gives you detailed procedures for operating the printer. Unless other-
wise stated, the printer power is assumed to be on for these procedures.
This chapter also contains a list of the status indicators for each possible status to
help you quickly recognize printer status. If the status indicates a problemj the
chart refers you to Chapter 6 to solve the problem.
For the printer to be ready to operate, you must ensure that:
• It
has been set up as described in IBM 5225 Printer, Models 1, 2, 3, and 4,
Setup Instructions, GA34-0085.
• The ribbon is installed as explained in Chapter 4 of this guide.
• The appropriate forms for the next printing job are loaded and adjusted as
explained in Chapter 3.
Warning: If you observe smoke, excessive heat, or an unusual odor coming from the
printer,
turn
off the printer power immediatdely. Unplug the power cord, keep the
printer's doors and cover closed, and request service.