Table of Contents
Advertisement
Changing the Printer's Address
Using Test
5-10
GA34-0054
The printer's address is set when the printer is set up.
If
you need to check or
change the printer's address, follow these steps:
Step 1
Switch off the printer power.
Step 2
Refer to "Address Switches" in
Chapter 2.
Note: Changing the address switches at your printer can cause problems with other
devices connected to the same data cable. Before changing the address switches,
inform the host system operator.
Test generates a page of printed data while the printer is offline. You can use the·
page of test data for checking the print quality.
Before running Test, load the printer with single-part forms that are at least 375
millimeters (14.8 inches) wide. Ensure that the thickness control is adjusted for
single-part forms (see "C. Adjusting the Thickness Control" in Chapter 3).
Advertisement
Chapters
Table of Contents
