IBM 5225 1 Operator's Manual page 49

E. Setting the First Print Line
0
0
·0
Note: The first print line is set with the forms feed open.
1. Release the forms feed by pushing down on the release latches
G).
2. Pull the tension fingers toward the front of the printer. (See "A. Preparing to
Load Forms," step 6).
3. Turn the vertical adjustment control Oto move the first print line to position
Q,
70 to 80 millimeters (approximately 3 inches) below the bottom of the left
tractor cover.
111111111
3-14 GA34-0054