IBM 5225 1 Operator's Manual page 10

Form widths:
Form lengths:
Form copies:
Form type:
76.2 millimeters (3.0 inches) to 450.0 millimeters
(17. 7 inches)
7 6. 2 millimeters ( 3. 0 inches) to 3 17.5 millimeters
(12.5 inches)
Single-part (one sheet) or multipart (two to four
sheets, with or without carbon). Five and six
parts may be used, but must be tested.
Continuous, fan-fold, with margin feed holes
Horizontal perforation---...,;::::=.__
between pages
Continuous fan-fold
forms (blank or
preprinted)
See Forms Design Reference Guide for Printers,
GA24-3488, for complete forms specifications.
Introduction 1-3