Echomap Uhd 70/90 Connector View; Assigning A Shortcut Key; Tips And Shortcuts - Garmin ECHOMAP UHD2 Owner's Manual

ECHOMAP UHD 70/90 Connector View

POWER Power and NMEA 0183 devices
NMEA 2000 NMEA 2000 network
SONAR 12-pin transducer
PANOPTIX Panoptix
™
To prevent corrosion of the metal contacts, cover unused connectors with weather caps.
For best performance and to prevent corrosion, insert the cable connector fully into the port and turn the locking
ring clockwise to tighten it. If the split-collar locking ring is not installed, you must install it.

Assigning a Shortcut Key

You can quickly open commonly used screens by assigning a shortcut key. You can create a shortcut to screens
such as sonar screens and charts.
1 Open a screen.
2 Hold a shortcut key, and select OK.

Tips and Shortcuts

• Press to turn on the chartplotter.
• From any screen, press
brightness is so low you cannot see the screen.
• Hold a numbered key to create a shortcut to a screen.
• Select Home from any screen to return to the Home screen.
• Select Menu to open additional settings about that screen.
• Select Menu to close the menu when finished.
• Press to open additional options, such as adjusting the backlight and locking the touchscreen.
• Press , and select Power > Turn Off Device, or hold
chartplotter, when available.
• Press , and select Power > Sleep Device to set the chartplotter to standby mode, when available.
4
LiveScope sonar or Garmin
™
repeatedly to scroll through the brightness levels. This can be helpful when the
® Marine Network for sharing sonar, charts, and user data
NOTICE
until the Turn Off Device bar fills to turn off the
Introduction