Setting The Device Name; Updating The Media Player Software; Device Configuration; Turning On The Chartplotter Automatically - Garmin ECHOMAP UHD2 Owner's Manual

Setting Parental Controls on SiriusXM Radio Channels
Before you can set parental controls, the parental controls must be unlocked.
The parental control feature allows you to limit access to any SiriusXM channels, including those with mature
content. When enabled, the parental control feature requires you to enter a passcode to tune to the locked
channels.
Select Browse > Parental > Lock/Unlock.
A list of channels appears. A checkmark indicates a locked channel.
NOTE: When you view the channels after setting parental controls, the display changes:
• indicates a locked channel.
• indicates an unlocked channel.
Changing a Parental Passcode on a SiriusXM Radio
Before you can change the passcode, the parental controls must be unlocked.
1 From the media screen, select Browse > Parental > Change PIN.
2 Enter your passcode and select Done.
3 Enter a new passcode.
4 Confirm the new passcode.
Restoring Default Parental Control Settings Values
This process deletes all the settings information you have entered. When you restore the parental control
settings to their default values, the passcode value is reset to 0000.
1 From the media menu, select Installation > Factory Defaults.
2 Select Yes.
Clearing All Locked Channels on a SiriusXM Radio
Before you can clear all locked channels, the parental controls must be unlocked.
1 From the media screen, select Browse > Parental > Clear All Locked.
2 Enter your passcode.

Setting the Device Name

1 From the media screen, select Menu > Installation > Set Device Name.
2 Enter a device name.
3 Select Select Position or Done.

Updating the Media Player Software

You can update the software on compatible connected stereos and accessories.
See the stereo Owner's Manual at

Turning On the Chartplotter Automatically

You can set the chartplotter to turn on automatically when the power is applied. Otherwise, you must turn on the
chartplotter by pressing
Select Settings > System > Auto Power Up.
NOTE: When Auto Power Up is On, and the chartplotter is turned off using
reapplied within less than two minutes, you may need to press
100
support.garmin.com

Device Configuration

.
for instructions on updating the software.
, and power is removed and
to restart the chartplotter.
Device Configuration